|
|
 |
Home > Crystal Products
> Oscillators > Oscillator Characteristics
Clock oscillator characteristics
Additional general specifications for International Crystal Manufacturing
(ICM) dip oscillators, VCXOs, and surface mount oscillators not covered
on the individual specification pages are listed below.
Environmental / Mechanical Specifications
| Gross Leak Test |
All units 100% leak tested in Fluorinert FC-43. |
| Hermetically Sealed Package |
Mass spectrometer leak rate less than 2 x 10-8 Atm. CC/sec. of helium |
| Seal Strength |
2.27Kg max. force perpendicular to top and bottom |
Bend Test
(Pin Material) |
Will withstand maximum bend of 90°, referenced to base, for
2 bends.
(Iron and Nickel - Nickel coated, solder dipped.) |
Solvent Resistance
Marking Ink |
Isopropyl Alcohol, Trichloroethane
Note 1 - Ultrasonic cleaning not to be used.
Note 2 - Unit can be cleaned in only one solvent listed.
Epoxy, heat cured |
| Solderability |
The terminals are considered solderable and acceptable for electrical
connection if 95% of the cooled solder surface is uniform and free
from breaks and pinholes. The other 5% of the cooled solder surface
may show only pinholes, voids, or rough spots that are not concentrated
in one area. |
| Maximum Soldering Temp. |
270°C for 10 seconds on leads. |
| Shock Test |
1000 G's, 0.35 ms, 1/2 sine wave, 3 shocks each plane |
| Vibration Test |
10-55 Hz, 0.060" D. A., 55-2000 Hz, 20 G's, duration time 6
hours |
| Temperature Cycle |
20 cycles form -55°C to +125°C, 1 hour per cycle, 25°C
ref |
Call us today at 1-800-725-1426, fill out our contact
form, email us at info@icmfg.com
or request an online quote for p
Crystal Manufacturing radio frequency control devices – quartz crystals,
oscillators, filters, TCXOs, and precision crystals.
Crystals | Precision
Crystals | Quartz Microbalance
| Oscillators | TCXOs
| Filters
Download Catalog | Request
a Quotation | Contact International Crystal
Site Map | Terms & Conditions | Home
International Crystal Manufacturing
10 North Lee Avenue • Oklahoma City, OK
73102
Toll Free Phone: 1-800-725-1426 • Toll Free
Fax: 1-800-322-9426
Phone: 1-405-236-3741 • Fax: 1-405-235-1904
Email: info@icmfg.com
|
|
